Innovate-motorsports LC-2 Manual de usuario descargar pdf (Pagina 5)

2.2.1 Single Innovate Device Relay Wiring Instructions

3 Sensor Placement

Optimum bung placement will vary from application to application, but using

the guideline below will ensure the longest sensor life with the most accurate

readings. Using a bung is the preferred method for mounting the oxygen

sensor in all applications.

 Weld the bung at least 24 inches downstream of the exhaust port

outlet (after the collector), or 24 inches after the turbocharger if so

equipped. The bung should be welded before the X or H pipe if so

equipped.

 Using a clock as reference, mount the bung between the 9:00

o’clock and 3:00 o’clock position. Welding the bung in the lower

section of the exhaust pipe can result in sensor damage caused by

condensation making contact with the sensor’s internal heating

element.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Innovate-motorsports LC-2 Manual de usuario Pagina 5