Innovate-motorsports ST-12 Manual de usuario descargar pdf (Pagina 31)

7.2 LED Blinking Codes

1. LED blinking codes

a. Blinking (about) 2 times per second: Heater Warm up

b. Blinking (about) 4 times per second: Heater Calibration

c. LED off: No Power or free air calibration

d. Steady on: Normal Operation Indication

e. Blink in sequence with 2 second pause: Error indication (see error indication detail below)

2. Error indications

a. Count the number of fast flashes between the 2 second pauses. The number of flashes

indicates the error code:

i. 1 flash = Error 1

ii. 2 flashes = Error 2

iii. And so on, See Appendix C of the LC-1 Manual for further error code details.

NOTE: You may also use most any Normally Open (N.O.) LED-illuminated momentary push button with a

1.2 - 2.2V LED for the above process.

1 2 ... 26 27 28 29 30 31 32 33

Sin comentarios

Innovate-motorsports ST-12 Manual de usuario Pagina 31